Naval Architect JB Marine Consultancy Naval Architect  

Tel / Fax +44 (0)1481 253053    Mobile Tel: 07781 100621    Email: john@jbmarine.biz

  Recreational Craft Directive 

Back to the RCD main page

The following is a list of current ISO standards that are relevant to the RCD.

The 'Technical File' is basically the technical report documenting how these ISO standards have been met by a particular vessel or vessel type. It must be submitted as part of the RCD certification.

EN* 24565 Small craft - Anchor chains

EN ISO* 4566 Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper

EN* 24567 Shipbuilding - Yachts - Waste water fittings

ISO 6185-1 Small craft - Inflatable boats with a minimum buoyancy of 1800 N - Part 1: Motor maximum power rating of 4,5 kW

ISO 6185-2 Small craft - Inflatable boats with a minimum buoyancy of 1800 N - Part 2: Motor power rating of 4,5 kW to 15 kW inclusive

ISO 6185-3 Small craft - Inflatable boats with a minimum buoyancy of 1800 N - Part 3: Motor power rating of 15 kW and greater

EN ISO 7840 Small craft - Fire-resistant fuel hoses 

ISO 8099-1 Small craft – Waste water retention and treatment systems – Part 1: Toilet retention systems

ISO* 8099-2 Small craft – Waste water retention and treatment systems – Part 2 Toilet recirculating and treatment systems

ISO* 8099-3 Small craft – Waste water retention and treatment systems – Part 3: Grey water retention systems

EN ISO 8469 Small craft - Non-fire-resistant fuel hoses

EN ISO 8665 Small craft - Marine propulsion engines and systems - Power measurements and declarations

ISO 8666 Small craft – Principal data

EN 28846 Small craft - Electrical devices - Protection against ignition of surrounding flammable gases

EN 28847 Small craft - Steering gear - Wire rope and pulley systems 

EN 28848 Small craft - Remote steering systems

EN 28849 Small craft - Electrically operated bilge-pumps

ISO 9093-1 Small craft – Seacocks and through-hull fittings – Part 1: Metallic

ISO 9093-2 Small craft - Seacocks and through-hull fittings – Part 2: Non-metallic

ISO 9094-1 Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m

ISO 9094-2 Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m and up to 24 m

EN ISO 9097 Small craft - Electric fans

EN 29775 Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power

EN ISO 10087 Small craft - Hull identification - Coding system

ISO 10088 Small craft - Permanently installed fuel systems and fixed fuel tanks

ISO 10133 Small craft - Electrical systems - Extra-low-voltage d.c. installations

ISO 10239 Small craft - Liquefied petroleum gas (LPG) systems

EN ISO 10240 Small craft - Owner's manual 

EN ISO 10592 Small craft - Hydraulic steering systems 

EN ISO 11105 Small craft - Ventilation of petrol engine and/or petrol tank compartments

ISO 11192 Small craft – Graphical symbols

ISO 11547 Small craft - Start-in-gear protection 

ISO 11591 Engine-driven small craft - Field of vision from helm position

ISO 11592 Small craft - Determination of maximum propulsion power

ISO 11812 Small craft – Cockpits and cockpit drainage

ISO 12215-1 Small craft - Hull construction - Scantlings - Part 1: Materials: Thermosetting resins, glass fibre reinforcement, reference laminate

ISO 12215-2 Small craft - Hull construction - Scantlings - Part 2: Materials for sandwich construction, embedded materials

ISO 12215-3 Small craft - Hull construction - Scantlings - Part 3: Materials: Steel, aluminium, wood, materials

ISO 12215-4 Small craft - Hull construction - Scantlings - Part 4: Workshop and construction

ISO 12215-5 Small craft - Hull construction - Scantlings - Part 5: Design pressures, allowable stresses, scantling determination

ISO 12215-6 Small craft - Hull construction - Scantlings - Part 6: Details of design and construction

ISO 12216 Small craft - Windows, portlights, hatches, deadlights and doors - Strength and tightness requirements

ISO 12217-1 Small craft - Stability and buoyancy - Methods of assessment and categorisation - Part 1: Non-sailing boats

ISO 12217-2 Small craft - Stability and buoyancy - Methods of assessment and categorisation - Part 2: Sailing boats

ISO 12217-3 Small craft - Stability and buoyancy - Methods of assessment and categorisation - Part 3: Boats of up to and including 6 m Lh

ISO 13297 Small craft - Electrical systems - Alternating current installations

ISO 13929 Small craft - Steering gear - Rack and pinion direct link systems

ISO 14509 Small craft - Measurement of sound pressure level of airborne sound emitted by motor craft

ISO 14945 Small craft - Builder’s plate

ISO 14946 Small craft - Maximum load capacity

ISO 15083 Small craft - Bilge pumping systems

ISO 15084 Small craft - Anchoring, mooring and towing - Strong points

ISO 15085 Small craft - Guardrails, lifelines and handrails

Back to the RCD main page

If you would like to contact JB then click here: 

JB will endeavour to respond as soon as possible to your enquiry.

<<<<<<  Back to JB Home Page  >>>>>>